Description
Optical fiber fast connector is a kind of connector which can solve the problem of ultra long distance wiring and fiber to the home project. It is widely used in the construction site of quick connection link, and provides a fast and stable connection during fiber optic construction. There is no need for glue curing and grinding in the field assembly, which provides a very fast and effective help for engineers on installation, maintenance and repair of fiber to the home project.
Application
- Broadband campus network
- Fiber to the home
- Broadband limited TV
- Intelligent broadband
- Fiber to the building
Features
- Each ferrule has been tested within 0.5dB of insertion loss, reach TELECOM standard;
- Adopt Three Circle A-class ceramic ferrule, improves product stability, low loss and small change;
- Large scale production, mature technology, exquisite, which ensure the quality of connectors;
- It has strong practicability and can be reused for more than 15 times;
- Stable operation performance, low insertion loss, low use cost, low maintenance rate and fast installation speed;
- Humanized structure design: preset limit point of drop cable at the boot, and automatically generate a small micro bend according to the correct cutting length of the product (see below figure). The micro bend indicates that the optical fiber has been in good contact with the embedded optical fiber, and the micro bend must exist, but not too large, otherwise the loss during the period will be affected.
- There is axial clamping force at the optical fiber joint. When the optical fiber is butted, the gap between the two optical fiber sections is almost zero, so the connection loss is less than 0.3dB。
- Telecom standard mechanical connectors adopt brand newhigh-performance PEI material, it has good high temperature stability, high toughness and strength, good flame retardant performance, mechanical performance and wear resistance, durable and stable performance.
Technical parameter:
Model | YDFAC-003-L | YDFAC-003-S |
Ferrule | UPC, APC | |
Dimension | 60mm*9mm | 55mm*9mm |
Insertion loss | <0.5dB, average≤0.3dB | |
Operation time | About 50 seconds (not including fiber cut time) | |
Fiber embedded length | 5.9mm | |
Fastening strength of naked fiber | ≥2N | |
Tensile strength | ≥40N | |
Reusable Time | ≥ 10 times | |
On-line tensile strength (20N) | △IL≤0.3dB | |
Mechanical durability(500 times) | △IL≤0.3dB | |
Drop-off test (drop off height 4m, once per direction, total 3 times) | △IL≤0.3dB | |
Return loss | UPC≥45dB, APC≥55dB | |
Fiber type | Single mode | |
Cable type | 2.0*3.0mm flat drop cable | |
Working temperature | -40 ~+850C |
Installation Process
- Take out theboot,put it into the drop cable;
- Remove 5cm jacket of the drop cablewith cable stripper;
- Peel off the coating outside the length fixer with Miller’s pliers;
- Add industrial alcohol with dust-free paper and wipe the core;
- Cutting flat fiber core with high precision fiber cleaver;
- The fiber goes through the boot of the connector till fiberbend a little;
- Clamp the optical fiber with the boot and screw on;
- Move up the switchto the top, lock and clamp the bare fiber;
- Put on the green house, finish assembly.