Description
Features
- Fast and easy to operate, no need fusion splicer or matching gel;
- Use precise V groove butt joint, no need embedded fiber inside;
- Low loss around 0.1dB ensure high connection performance;
- Operating time is less than 20seconds, very fast (not include fiber stripping time);
- Without fiber optic matching gel, there are no issues of fiber optic matching paste loss, pollution, and aging;
- Its unique versatile design is used for splicing optical fibers with buffer coating diameters of 250μm and 900μm, providing high performance connections of multi-mode and single mode fibers;
- The device is equipped with a fiber optic guiding structure, making it fast and convenient to pass through the fiber optic cable positioning and clamping include crimping the optical cable, which can also be easily installed.
Technical Specification
| Model | YDMSC30 |
| Bare fiber mechanical Splicer dimension | 37*7*3mm |
| Outer protection box dimension | 90*8*6mm |
| Main body material | PEI |
| V Groove material | Aluminum |
| Outer Protection box material | ABS |
| Applicable of cable | 2.0*3.0mm flat drop cable |
| Bare fiber diameter | 125um (657A&657B) |
| Cladding diameter | 250um |
| Applicable fiber mode | Single mode |
| Insertion loss on average | ≤0.3dB (1310&1550nm), typical 0.1dB |
| Return loss | ≥45dB |
| Optical fiber tensile strength | ＞6N |
| Cable tensile strength | ＞20N |
| Operating temperature | —40~+85℃ |
| High and low temperature cycling experiment (168h) | △IL≤0.5dB |
| High temperature and high humidity experiment (96h) | △IL≤0.5dB |
| Drop experiment (1.5m high cement floor, total 8 times) | △IL≤0.5dB |
| Net weight | 5g |
Reviews
There are no reviews yet.