Description
ST patch cord are fiber optic patch cord with ST connectors at both ends of the optical cable, suitable for single mode and multi-mode cables. ST fiber optic patch cords are one of the older generation fiber optic patch cords, but they have been widely used in multimode networks, including buildings and campus LANs.
ST stands for “Stab&Twist”. The ST connector adopts a metal circular bayonet rotating locking structure, with a long floating spring sleeve built-in to fix the optical fiber. After insertion, it can be rotated half a circle and fixed with the bayonet. And it uses high-precision ceramic ferrule, with excellent loss recovery and insertion performance, making it convenient and fast to use.
The ST connector was developed by AT&T company, with main parameter indicators comparable to FC and SC connectors. However, it is not commonly used in company applications and is usually used for multimode device connections. It is more commonly used when docking with equipment from other manufacturers. Due to its requirement for large space on the panel, it is commonly used in fiber optic distribution frames, and its size can be universal with FC circular adapter holes.
ST and SC interfaces are two types of fiber optic connectors. For 10Base-F connections, the connector is usually ST type, while for 100Base-FX, the connector is mostly SC type. The core of the ST connector is exposed, while the core of the SC connector is inside the connector.
ST Patch Cord Features
※ High repeatability and high return loss
※ High stability and good interchangeability
※ Low insertion loss and high reliability
※ Three types of fiber end faces: PC, UPC, APC
※ The entire series of optical fibers can be used: multi-mode (50/125, 62.5/125, OM3, OM4, OM5), single-mode (G.652, G.655, G.657, etc.);
ST to ST Fiber Patch Cable Application
※ FTTX (FTTH, FTTC, FTTB, FTTD, FTTA ,FTTR, etc)
※ Fiber optic data transmission
※ Local network, wide area network, cable TV
※ Fiber optic data transmission testing equipment and active device terminals
ST Patch Cord Specification
Connector type | ST connector |
Fiber type | G652D, G657A2, G657A1, G655, G657B3, OM1 OM2 OM3 OM4,OM5, etc |
Wavelength | 1260-1650nm |
Fiber cores | 1 core, 2 cores or multi-fiber |
Cable diameter | Φ3mm,Φ2.6mm, Φ2.4mm, Φ2.0mm,Φ1.6mm, Φ0.9mm or custom |
Polish method | UPC, PC, APC(8°), SPC |
Cable color | Yellow, white, blue, green, grey, red, black, aqua, orange, purple, etc. |
Fiber radius of curvature | ≥ 40 mm (G.652D and G.655C); ≥ 20 mm (only G.657A2) |
Insertion loss | ≤ 0.1dB (Master)
≤ 0.3dB (Standard) Tested by JDS RM 3750 |
Return loss | UPC ≥ 55dB,APC ≥ 60dB (typ.65dB)–Single mode
UPC≥ 35dB (typ.38dB)-Multimode Tested by JDS RM3750 |
Repeat ability | ±0.1dB |
Operating temperature | -40 ° C to 85 ° C |
Geometry Requirement
(For Single mode) |
Ferrule End face Radius:
7mm ≤ R ≤ 12mm (APC) 10mm ≤ R ≤ 25mm (Standard) Apex Offset ≤ 30 μm (Master) Apex Offset ≤ 50 μm (Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 |
Yingda can make ST connectors, st patch cord, and st to lc st fc e2000 patch cable assemblies, below some for your reference.
Armored ST SC Patch Cord Duplex Singlemode patch cord duplex st sc SC to ST patch cord sm dx ST to SC duplex patch cord multimode
ST Patch Cord Order Information
Eg: Patch Cord SCT/PC – ST/PC Simplex single mode OS1 2.0mm 1meter
Part no.: YDPC-STST-SMSX-2001
YDPC | – | XX | XX | – | XX | XX | – | XX | XX |
YD=Yingda
PC=Patchcord |
SA=SC/APC
SU=SC/UPC LA=LC/APC LU=LC/UPC FA=FC/APC … |
SA=SC/APC
SU=SC/UPC LA=LC/APC LU=LC/UPC FA=FC/APC … |
SM=Single mode
M1=OM1 M2=OM2 M3=OM3 M4=OM4 M5=OM5 |
SX=Simplex
DX=duplex 04=4core 08=8core |
09=0.9mm
16=1.6mm 20=2.0mm 30=3.0mm 35=3.5mm 50=5.0mm … |
01=1m
02=2m 03=3m … |