Description
During field installation, you don’t need to take off the dust cap or add plastic housing after pull, only need to unscrew off the metal head, then finish installation, it contain the whole connectors inside of the metal head. Furthermore, there is pulling eye for the rope to pull at top of the head for rope to pull. The metal head is made of high quality and durability copper or zinc alloy material, which ensure the connector and fiber in good condition after pulling. And it is ideal solution for ftth upgrade network or access network.
Features of SC to LC Patch Cord
- Fast and convenient to operate, no need special tools
- Special design for limited space less than 10mm
- Unique crimping ensure high tensile strength
- Compatible with general SC LC interface
Specification
| Connector type | SC |
| Fiber type | G652D, G657A2, G657A1, G655, G657B3, OM1 OM2 OM3 OM4,OM5, etc. |
| Wavelength | 1260-1650nm |
| Fiber cores | 1 core, 2 cores or multi-fiber |
| Cable diameter | Φ3mm,Φ2.6mm, Φ2.4mm, Φ2.0mm,Φ1.6mm, Φ0.9mm or custom |
| Polish method | UPC, PC, APC（8°）, SPC |
| Cable color | Yellow, white, blue, green, grey, red, black, aqua, orange, purple, etc. |
| Fiber radius of curvature | ≥ 40 mm (G.652D and G.655C); ≥ 20 mm (only G.657A2) |
| Insertion loss | ≤ 0.1dB (Master) ≤ 0.3dB (Standard) Tested by JDS RM 3750 |
| Return loss | UPC ≥ 55dB,APC ≥ 60dB (typ.65dB)–Single mode UPC≥ 35dB (typ.38dB)-Multimode Tested by JDS RM3750 |
| Repeat ability | ±0.1dB |
| Operating temperature | -40 ° C to 85 ° C |
| Geometry Requirement (For Single mode) | Ferrule End face Radius: 7mm ≤ R ≤ 12mm (APC) 10mm ≤ R ≤ 25mm (Standard) Apex Offset ≤ 30 μm (Master) Apex Offset ≤ 50 μm (Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 |
