With over a decade of experience in passive fiber splitter production and development, Yingda boasts extensive experience in practical management, quality control, and R&D capabilities,
WDM technology expands the capacity of fibers by simultaneously transmitting multiple optical signals of different wavelengths in the same fiber, making one fiber act as multiple
The difference in transmission rate between MT and MPO patch cable is mainly reflected in the application scenario and physical structure, rather than the theoretical upper
One end of the patch cord uses an MT connector (or called MT ferrule) and the other end uses an MPO connector, which is mainly
MPO Multi-fiber Push-On connectors are all made in accordance with the international standard IEC61754-7. MPO patch cable wiring must meet the TIA/EIA-568-C.3 standard and after 1000 plug-ins
When a fiber optic link has a problem, we must quickly locate and resolve it, otherwise it will cause great difficulties and troubles in our
Visual fault locator is also called red light pen, due to it use red light 650nm wavelength. The red light pen is the simplest tool
In fiber optic testing, common fault types and manifestations are as follows: Physical connection failure Equipment and signal failure Cascade node failure Environmental and construction
Excessive attenuation of fiber optic lines is a common fault in Cable TV networks, and a graded treatment strategy should be adopted based on specific causes. The
Sorry that there’s no information that interests you. Please fill in the feedback form so that we can improve.
