SC Patch Cord Manufacturer, Factory

Description

SC to sc patch cord are jumpers with SC connectors at both ends, and are one of the early and commonly used fiber optic patch cord, which is not only convenient to use, but also low-cost, making them one of the cheaper fiber patch cables.

The SC fiber optic connector is developed by NTT Corporation in Japan, with a rectangular outer sheath. The structure and size of the ferrule and coupling sleeve are exactly the same as the FC type, and the end face of the ferrule is ground by APC or UPC grinding methods. The SC connector has a simple insertion and removal operation, using a pin and latch type for fastening without rotation. It is commonly used as a connector for GBIC optical transceivers and is more commonly used on routers. This type of connector is easy to insert and remove, with low interference loss fluctuations, high compressive strength, high installation density, and low insertion loss fluctuations. It is a type of fiber optic connector that can be installed as duplex, triplet, or quadruple, and is widely used in fiber optic communication networks.

SC to SC Patch Cord Features

※ High repeatability and high return loss

※ High stability and good interchangeability

※ Low insertion loss and high reliability

※ Three types of fiber end faces: PC, UPC, APC

※ The entire series of optical fibers can be used: multi-mode (50/125, 62.5/125, OM3, OM4, OM5), single-mode (G.652, G.655, G.657, etc.);

SC Patch Cord Application

※ FTTX (FTTH, FTTC, FTTB, FTTD, FTTA ,FTTR, etc)

※ Fiber optic data transmission

※ Local network, wide area network, cable TV

※ Fiber optic data transmission testing equipment and active device terminals

SC To SC Patch Cord Specification

Connector type	SC connector
Fiber type	G652D, G657A2, G657A1, G655, G657B3, OM1 OM2 OM3 OM4,OM5, etc
Wavelength	1260-1650nm
Fiber cores	1 core, 2 cores or multi-fiber
Cable diameter	Φ3mm,Φ2.6mm, Φ2.4mm, Φ2.0mm,Φ1.6mm, Φ0.9mm or custom
Polish method	UPC, PC, APC（8°）, SPC
Cable color	Yellow, white, blue, green, grey, red, black, aqua, orange, purple, etc.
Fiber radius of curvature	≥ 40 mm (G.652D and G.655C); ≥ 20 mm (only G.657A2)
Insertion loss	≤ 0.1dB (Master) ≤ 0.3dB (Standard) Tested by JDS RM 3750
Return loss	UPC ≥ 55dB,APC ≥ 60dB (typ.65dB)–Single mode UPC≥ 35dB (typ.38dB)-Multimode Tested by JDS RM3750
Repeat ability	±0.1dB
Operating temperature	-40 ° C to 85 ° C
Geometry Requirement (For Single mode)	Ferrule End face Radius: 7mm ≤ R ≤ 12mm (APC) 10mm ≤ R ≤ 25mm (Standard) Apex Offset ≤ 30 μm (Master) Apex Offset ≤ 50 μm (Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1

SC Patch Cord Order Information

Eg: Patch Cord SC/APC-SC/UPC Simplex single mode OS1 2.0mm 25meter

Part no.: YDPC-SASU-SMSX-2025

FIBER PATCH CORD

SC Fiber Patch Cord Types

Yingda can make all kinds of sc patch cord as customer request,multimode fiber patch cord or single mode fiber patch cable, sc lc st fc mpo e2000 mtrj, mu, LX.5, VF45, D4, etc. Below are SC to sc patch cord, if you need sc to fc patch cord, sc to lc patch cord, etc, please contact sales team for inquiry.